My Blog

My WordPress Blog

Embroidery Digitizing

If you are running an embroidery business and cater to a larger group of corporate clients, then definitely you will be having the bulk of orders about embroidery logos. For the information of readers, we would like to mention that embroidery digitizing is all about creating a piece of the digital image into some small text letters.  But in this whole process, you have to make sure that the text is easy to read and is often placed in the right perception according to your client logo.

Right here we have discussed a few major rules which you are required to follow for performing embroidery digitizing for small texts:

Rule No 1: Size of the letter:

You have to make sure that the size of the letter has to be large so it can be easy to read. The size of the letter should be depending upon the type of letter you are choosing which can be either small or capital. Capital letters should be having a height of maximum 4mm and if the letter is based on the combination of both capital and small letters then it should have the height of at least 5mm.  The width of the letter needs to be around 0.8-1mm.

Rule No 2: Closed Looping Letters

There are quite a few letters which are somehow little tricky to embroider upon such as p, b, o, and q.  If some high-density stitches have been assigned to all such letters without leaving enough space, the stitches will be able to cover the whole letter without leaving any white space within the loops.

Rule No 3: Pay Attention to Closely Placed Letters

If you want to give your text embroidery a clean perfection, then it is needed to put a suitable place in between the 2 letters in every single word.  It is recommended to leave a certain gap of around 0.5-1mm in between the two letters. If you prefer to have a lesser gap, then it might bring some sort of untidy or messy results in your final product.

Rule No 4: Assigning Stitch Density According to Fabric

If you are a professional in your digitizing work, then you probably would be aware of the importance of fabric in your stitching work.  It is just your fabric which will let you know how your text will appear in the final product.  Based on the fabric used, you have to assign the specific density of stitches to perform the embroidery perfectly.  For the high density of stitches, you can use light in weight fabric.

Rule No 5: Making Changes According to Client Requirements

In most of the conditions, it might be possible that you have to make certain changes in the whole embroidery digitizing design besides the client requirements. You should explain the whole required change to the client so they can better understand how the design will appear as a final product.

Leave a Reply

Your email address will not be published. Required fields are marked *